the UAE
Damp, mould & condensation survey software for the UAE
Built for an air-conditioned, humid-coastal climate
In the UAE, continuous air conditioning and coastal humidity drive condensation around chilled-water services, ducts and cold bridges — even when external walls look dry. Capture dew-point readings, mould extent and photo evidence in one offline report, in AED.
Hot, humid coastal conditions and intensive air conditioning make condensation and mould a real, recurring problem in UAE towers, villas and managed estates. DampApp Pro™ gives surveyors and facilities teams an offline workflow that documents moisture conditions and produces a professional PDF on site.
the UAE-specific inspection priorities
Use the property history, access available and current conditions to set the inspection sequence. These priorities guide evidence gathering; they are not a diagnosis or a compliance conclusion.
1. Start with cooling-side condensation evidence
In occupied towers, begin at fan-coil units, chilled-water risers, supply ducts and ceiling voids where access is safe. Record room air temperature and relative humidity, then capture surface readings, insulation condition, condensate-tray or drain observations and the exact location of any staining. This sequence separates what was seen from assumptions about the source.
2. Read the façade and roof against coastal exposure
For coastal villas and high-rise façades, document the elevation, window and balcony junctions, parapets, roof outlets and recent weather history supplied by the client. Photograph external water-shedding details before interior finishes where possible. In a region with infrequent but intense rain, a dated sequence can be more useful than a single interior image.
3. Keep plant-room and occupied-space evidence distinct
Plant rooms, service shafts and occupied apartments can have different temperatures, access constraints and maintenance histories. Log the inspection time, operating status of nearby cooling equipment, visible pipework insulation and any limits on access. Pair wide context photographs with close-up readings so a facilities team can decide what further investigation is warranted.
Built for the UAE professionals
Damp & mould surveyors
Diagnose condensation, penetrating and rising damp with dew-point readings and dated photos.
Independent inspectors
Structured, standards-referenced condition reports clients and managing agents can act on.
Small surveying firms
Give a compact team a repeatable inspection structure while each surveyor controls the conclusion.
Pest & timber specialists
Link moisture readings to timber decay and infestation findings in one report.
Landlords & managing agents
Move-in / move-out moisture and mould records that hold up in disputes.
Local context & indoor environment
There is no single UAE damp standard, so a clear, measured record matters: surface and air temperatures, relative humidity and dew point identify where condensation will form. Sustainability schemes such as Abu Dhabi's Estidama Pearl Rating and Dubai's Al Sa'fat address indoor environmental quality, which the report can reference alongside condition observations. Confirm any habitability requirements that apply to the property and tenure.
Why surveyors choose it here
- Offline-first: full capture, psychrometric calculations and on-device PDF with no signal. Optional Pro cloud sync resumes when you reconnect.
- AI report wording: turn moisture readings and mould photos into clear, standards-referenced prose (bring your own Gemini or OpenAI key, or use the free trial).
- AED & local terminology: remediation cost notes and report language prepared for the UAE.
- Evidence: photos carry EXIF-derived capture times (with attachment-time fallback); dew-point and surface-temperature readings support the surveyor's later interpretation.
the UAE damp & mould software — FAQs
Does it diagnose air-conditioning condensation in the UAE?▾
Yes. On-device dew-point and psychrometric tools, plus surface-temperature and humidity inputs, identify where condensation forms around chilled-water services, ducts and cold bridges — documented with timestamped photos and cost notes in AED.
Does it work offline across UAE sites?▾
Yes. Capture, calculations and PDF generation run on the device with no connection — useful in plant rooms, chiller halls and basements. Optional Pro cloud sync resumes when you reconnect.
Can it produce branded reports for my firm?▾
Yes. Pro adds your logo, colours and credentials to white-label PDF reports. Free exports remain usable and carry the DampApp Pro watermark.
Try it on a the UAE property
Download DampApp Pro free and run your next damp, mould or condensation survey — no card required.
