Enhanced Hygrothermal Moisture Risk Calculator
Hourly transient simulation using real ERA5 climate data, more accurate than steady-state Glaser for borderline constructions. Includes hygroscopic buffering. Explicitly simplified: not a WUFI / BS EN 15026 full simulation.
This calculator uses 8,760 hourly data points (one full year) instead of 12 monthly means. It catches cold snaps, detects drying opportunities in mild spells, and accounts for hygroscopic materials absorbing moisture before damage occurs. For borderline Glaser results, this gives a more defensible verdict.
| # | Layer (inside to outside) | Thick. (mm) | lambda | mu | sd (m) | w80 | |
|---|---|---|---|---|---|---|---|
| — | Internal surface (Rsi) | 0.13 | |||||
| 1 | 0.100 | 12 | |||||
| 2 | 0.100 | 1 | |||||
| 3 | 3.440 | 30 | |||||
| — | External surface (Rse) | 0.04 | |||||
Put the condensation check in your report.
DampApp Pro™ runs the Glaser condensation assessment (BS EN ISO 13788) on site. Build the construction layer by layer, take the climate from the property's own location, and the build-up table, verdict and worst-month Glaser diagram go straight into your PDF report. It works offline.