Condensation Risk Analysis & U-value Calculator (BS EN ISO 13788)
Calculate thermal transmittance (U-value / R-value) and assess interstitial condensation risk using the Glaser method: BS EN ISO 13788:2012 / BS EN ISO 6946:2017 / ASHRAE 90.1. Enter any location worldwide for live 20-year ERA5 climate normals. Toggle between SI (W/m²K) and US imperial (BTU/hr·ft²·°F). .
| # | Layer (inside → outside) | Thick. (mm) | λ (W/m·K) | μ | sd (m) | R (m²K/W) | |
|---|---|---|---|---|---|---|---|
| — | Internal surface (Rsi) | 0.130 | |||||
| 1 | 0.100 | 0.050 | |||||
| 2 | 1.632 | 0.132 | |||||
| 3 | 0.380 | 0.019 | |||||
| — | External surface (Rse) | 0.040 | |||||
| TOTAL | 134 mm | 2.112 | 0.371 |
Glaser Vapour Pressure Diagram
Temperature Profile: January
12-Month Analysis(Class 3 (dwelling), θi = 20°C)
| Month | θe (°C) | RH% | Δp (Pa) | p_i (Pa) | p_e (Pa) | Condensation | Rate (g/m²·mo) | Cumulative (g/m²) |
|---|---|---|---|---|---|---|---|---|
| January | 4.7 | 85 | 715 | 1441 | 726 | — | — | — |
| February | 4.8 | 82 | 713 | 1418 | 705 | — | — | — |
| March | 7.2 | 77 | 664 | 1446 | 782 | — | — | — |
| April | 9.4 | 73 | 620 | 1480 | 861 | — | — | — |
| May | 12.6 | 73 | 555 | 1619 | 1065 | — | — | — |
| June | 15.5 | 74 | 496 | 1799 | 1302 | — | — | — |
| July | 17.8 | 72 | 450 | 1916 | 1467 | — | — | — |
| August | 17.6 | 74 | 454 | 1942 | 1489 | — | — | — |
| September | 14.8 | 78 | 510 | 1823 | 1312 | — | — | — |
| October | 11.2 | 83 | 583 | 1687 | 1104 | — | — | — |
| November | 7.5 | 84 | 658 | 1529 | 870 | — | — | — |
| December | 5.0 | 85 | 709 | 1450 | 741 | — | — | — |
| Peak accumulated mass | 0.000 g/m² | |||||||
Fully formatted A4: suitable for client distribution, design submissions and technical records. Free, no watermarks.
Run the condensation check on site.
DampApp Pro™ has U-value and Glaser condensation analysis built in. Build the wall, roof or floor layer by layer as you find it, take the climate from the property's own location, and the build-up table, verdict and worst-month Glaser diagram go straight into your PDF report. It works offline.
Try our Enhanced Hygrothermal Calculator, which uses 8,760 hourly ERA5 data points and hygroscopic buffering to give a more accurate verdict for marginal constructions.